Log-in  
Cart Empty

CALL US 347.439.4209


 347.439.4209
sales@av4you.com

Evertz 5601ACO2 Automatic Changeover for 5601MSC Master Clock/Sync Generator

Click thumbnail images to get larger size
OVERVIEW
The 5601ACO2 Automatic Changeovers are intended for use with two 5601MSC Master Clock/Sync Generators. The 5601ACO2 system uses latching relays to ensure maximum reliability and minimal disruption in the event of any failure. The complete system provides the highest level of security for television station video and time synchronization systems. The 5601ACO2 is a 2RU ACO for all outputs of the 5601MSC. Two power supplies are included as a standard feature, to alleviate any single point of failure concerns.
There are three switches behind the front panel for added security. There is an AUTO/MANUAL switch, a GPI/FRONT PANEL switch and an A/B select switch for manual changeover. In automatic mode, all signals from both 5601MSC are monitored to detect any abnormal signals. For example, if a level, pulse width, phase, time code error or other abnormality is detected, the 5601ACO2s circuitry will trigger and the entire bank of signals will be switched to the backup 5601MSC. In manual mode the changeover can be operated from a GPI or from the front panel switch. LEDs provide status information as to the health of the two 5601MSC, together with indication as to which one is active. In addition, two GPO outputs indicate which master is active and when the inputs from both masters are not the same
Category  ➤  Video Production   ➤  Changeover
 In Stock    Available QTY: 1
 SKU# 3969
Functional Condition
FULLY FUNCTIONAL
Cosmetic Condition
VERY GOOD
DESCRIPTION
For sale is ONE (1) used 5601ACO2 automatic changeover. Excellent condition with only some light scratches (mostly top/bottom cover). Actual photos are showed. Power cords are not included unless mentioned in the description.
SHIPPING
$42.50 via UPS Service
US Continental Only
Other options available.
Please inquire
$3,493.00
QTY
Only 1 unit available!
FEATURES & SPECS
  • Three protected switches select automatic, front panel or GPI activation of changeover
  • Front panel status LEDs show the health of each of the inputs
  • Front panel status LEDs show the operational modes of the changeover
  • Redundant power supply standard
  • Push button to show cause of last changeover
  • Dual hot swappable power supplied and fans
  • Hot swappable main board
  • GPIO input/outputs
  • Automatic changeover is a voting system based on which source has the most valid signals and that the valid signals on the present master are also on the backup
  • VistaLINK┬« control for device configuration and status monitoring (5600ACO2 and 5601ACO2 only)
  • 6 video/sync or other coaxial signals
  • 8 SD/HD/3G outputs