Av4you specializes in professional broadcast video production equipment. We are your source for processing terminal gear, switchers, routers, tripods or any other video production gear. Visit out store page to find great deals for Evertz, Miranda, Harris, openGear ..etc.
Two independent video paths supporting 3G/HD/SD-SDI video - supports 525i/59.94, 625i/50, 1080i/60, 1080i/50, 1080p/24sF, 720p/60, 720p/50, 1080p/50 and 1080p/60 and the 1/1.001 divisor versions where applicable - auto sense using SMPTE ST 352 payload ID
1 bypass protected BNC Serial Digital Output from each input - with embedded D-VITC according to SMPTE ST 266 (SDI formats only) and ATC according to SMPTE ST 12-2
1 Monitor output from each input with visual character display of timecode
Reads LTC and transcodes it to D-VITC (SDI only) and/or ATC onto 3G/HD/SD-SDI video
Reads LTC, D-VITC (SDI only) and/or ATC and makes visual Character burn-in
Reads D-VITC (SDI only) and/or ATC and transcodes to LTC
The HD9010TM requires SMPTE ST 292-1 (1.5Gb/s) high definition serial digital video for normal operation. The HD9010TM\\\\\\\\\\\\\\\'s time code generators can be referenced to the input video or to an analog bi-level or tri-level signal. When generating 24Fps timecode it will also lock the generator count sequence to a 6Hz pulse.
The HD9010TM generators can be slaved to incoming LTC or ATC or can be set to free run. The generators may also be momentarily synchronized to one of the readers, and then continue to increment normally regardless of the reader code. The second LTC output normally follows the primary output, however the two generators can be operated at different frame rates to supply both 24Fps and 30Fps time code when used in a 1080p/24 environment. The drop frame conversion mode allows you to generate Drop Frame code on 1080i/59.94 broadcast master tapes when adding 3.2 pulldown to 1080p/23.98sF source material.
Video formats supported: 1080i/60, 1080i/50, 1080p/30, 1080p/30sF, 1080p/25sF, 1080p/24sF, 1035i/60, 720p/60, 720p/50 and the 1/1.001 divisor versions where applicable
Reads SMPTE ST 12-2 LTC and VITC ancillary time code packets from incoming video - read line auto detected
Generates SMPTE ST 12-2 LTC and VITC ancillary time code packets on output video
Two LTC readers and two LTC generators operate at 24, 25 or 30 Fps nominal rate in accordance with SMPTE ST 12-1 specification